Press "Enter" to skip to content

月度归档: 2021年5月

MPC-HC部署MPC VideoRender滤镜

1, 准备工作

MPC-HC的下载地址
MPC VideoRender的下载地址

2, 安装MPC VideoRender滤镜

将下载回来的MPC VideoRender滤镜解压至 C:\Program Files\mpcVR 目录下
右键”以管理员身份运行” Install_MPCVR_64.cmd
则会看到下方提示

Installation succeeded.
Please do not delete the MpcVideoRenderer64.ax file.
The installer has not copied the files anywhere.

3, 在MPC-HC中启用MPC VideoRender滤镜

打开MPC-HC, 找到”选项”, 进行如下设定

参考文档:
https://ngabbs.com/read.php?tid=25033883&rand=660

1 Comment

CentOS 7解决arp欺骗

某天发现一台CentOS机器网络一切正常, 但是却无法正常上网. 后经查询, 发现该机器的网关mac地址与实际网关的mac地址不符.  下面是查看和解决办法.

查看arp

$ cat /proc/net/arp 
IP address       HW type     Flags       HW address            Mask     Device
192.168.43.62    0x1         0x2         24:6e:96:93:c9:7d     *        eth0
192.168.43.61    0x1         0x2         24:6e:96:8c:e0:65     *        eth0
192.168.43.154   0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.153   0x1         0x2         52:54:00:fa:bb:fc     *        eth0
192.168.43.60    0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.59    0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.151   0x1         0x2         52:54:00:aa:73:e2     *        eth0
192.168.43.11    0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.31    0x1         0x2         00:be:75:c7:47:ea     *        eth0
192.168.43.111   0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.27    0x1         0x2         52:54:00:b4:3f:a3     *        eth0
192.168.43.224   0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.26    0x1         0x2         52:54:00:33:50:7e     *        eth0
192.168.43.223   0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.25    0x1         0x2         52:54:00:b4:3f:a3     *        eth0
192.168.43.1     0x1         0x2         3c:f5:cc:91:79:87     *        eth0
192.168.43.163   0x1         0x2         52:54:00:78:13:7d     *        eth0
192.168.43.162   0x1         0x2         52:54:00:7f:83:a4     *        eth0
192.168.43.104   0x1         0x2         52:54:00:34:0c:fc     *        eth0
192.168.43.21    0x1         0x0         00:00:00:00:00:00     *        eth0
192.168.43.44    0x1         0x2         24:6e:96:93:a3:c4     *        eth0
192.168.43.43    0x1         0x2         24:6e:96:8c:df:64     *        eth0
192.168.43.158   0x1         0x2         52:54:00:9a:ff:9f     *        eth0
192.168.43.122   0x1         0x2         52:54:00:99:e5:5e     *        eth0


$ arp -a
? (192.168.43.62) at 24:6e:96:93:c9:7d [ether] on eth0
? (192.168.43.61) at 24:6e:96:8c:e0:65 [ether] on eth0
? (192.168.43.154) at <incomplete> on eth0
? (192.168.43.153) at 52:54:00:fa:bb:fc [ether] on eth0
? (192.168.43.60) at <incomplete> on eth0
? (192.168.43.59) at <incomplete> on eth0
? (192.168.43.151) at 52:54:00:aa:73:e2 [ether] on eth0
? (192.168.43.11) at <incomplete> on eth0
? (192.168.43.31) at 00:be:75:c7:47:ea [ether] on eth0
? (192.168.43.111) at <incomplete> on eth0
? (192.168.43.27) at 52:54:00:b4:3f:a3 [ether] on eth0
? (192.168.43.224) at <incomplete> on eth0
? (192.168.43.26) at 52:54:00:33:50:7e [ether] on eth0
? (192.168.43.223) at <incomplete> on eth0
? (192.168.43.25) at 52:54:00:b4:3f:a3 [ether] on eth0
gateway (192.168.43.1) at 3c:f5:cc:91:79:87 [ether] on eth0
? (192.168.43.163) at 52:54:00:78:13:7d [ether] on eth0
? (192.168.43.162) at 52:54:00:7f:83:a4 [ether] on eth0
? (192.168.43.104) at 52:54:00:34:0c:fc [ether] on eth0
? (192.168.43.21) at <incomplete> on eth0
? (192.168.43.44) at 24:6e:96:93:a3:c4 [ether] on eth0
? (192.168.43.43) at 24:6e:96:8c:df:64 [ether] on eth0
? (192.168.43.158) at 52:54:00:9a:ff:9f [ether] on eth0

绑定arp

绑定arp的过程在某些国外网站称之为Create a Static ARP Table. 下面演示手动绑定网关192.168.43.1的mac地址为74:ea:c8:2d:9f:f6

arp -s 192.168.43.1 74:ea:c8:2d:9f:f6

 

Leave a Comment